BSLGS - 6041 VIDMAR GRAY 8-121-900-01

  • MSDS: BSLGS
  • Manufacturer: RAABE CORP
  • Product Name: 6041 VIDMAR GRAY 8-121-900-01
  • National Stock Number: 8010-00F030555
Product Identification

Product ID:6041 VIDMAR GRAY 8-121-900-01
MSDS Date:02/20/1989
FSC:8010
NIIN:00F030555
MSDS Number: BSLGS

Responsible Party
RAABE CORP
MILWAUKEE, WI 53223
US

Emergency Phone: 414-255-9500

Info Phone: 414-255-9500

Cage: 0A3L4

Contractor
RAABE CORPORATION THE PRECISION COLOR COMPANY
1090 MENOMONEE FALLS, WI 53051-1630 US

Telephone: 414-255-9500/800-966-7580

Cage: 0A3L4

Ingredients

BUTANE, N-BUTANE

CAS: 106-97-8

RTECS: EJ4200000

Fraction By Weight: <5%

OSHA PEL 800 PPM

ACGIH TLV: 1900 MG/CUM


TOLUENE

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: <10%

ACGIH TLV: 100 PPM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


2-BUTANONE (METHYL ETHYL KETONE) (MEK)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: <5%

OSHA PEL 200 PPM

ACGIH TLV: 590 MG/CUM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


HEXONE, METHYL ISOBUTYL KETONE (MIBK), 4-METHYL-2-PENTANONE

CAS: 108-10-1

RTECS: SA9275000

Fraction By Weight: <5%

OSHA PEL 410 MG/CUM

ACGIH TLV: 205 MG/CUM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


BUTYL ACETATE (N-BUTYL ACETATE)

CAS: 123-86-4

RTECS: AF7350000

Fraction By Weight: <5%

OSHA PEL 710 MG/CUM

ACGIH TLV: 710 MG/CUM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


ACETONE; DIMETHYL KETONE

CAS: 67-64-1

RTECS: AL3150000

Fraction By Weight: <40%

OSHA PEL 2400 MG/CUM

ACGIH TLV: 50 PPM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


XYLENE, DIMETHYLBENZENE, XYLOL

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: <5%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM, SKIN

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


PROPYLENEGLYCOL MONOMETHYL ETHER ACETATE,

CAS: 108-65-6

RTECS: AI8925000

Fraction By Weight: <5%

ACGIH TLV: 100 PPM


PROPANE

CAS: 74-98-6

RTECS: TX2275000

Fraction By Weight: <16%

OSHA PEL 1000 PPM

ACGIH TLV: SIMPLE ASPHYXIANT


ISOBUTANE, 2-METHYLPROPANE

CAS: 75-28-5

RTECS: TZ4300000

Fraction By Weight: <5%

OSHA PEL 1800 MG/CUM

ACGIH TLV: 800 PPM

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: VAPORS ARE ANESTHETIC,
IRRITATION TO RESPIRATORY TRACT, NERVOUS SYSTEM DEPRESSION.
REPEATED & PROLONGED OCCUPATIONAL OVEREXPOSURE TO SOLVENTS MAY
CAUSE PERMANENT BRAIN & NERVOUS SYSTEM DAM AGE. SKIN/EYES: PRIMARY
IRRITANT.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: DROWSINESS, LIGHTHEADEDNESS,
HEADACHES, DIZZINESS, STAGGERING, CONFUSION, UNCONSCIOUSNESS, OR
COMA.

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. GIVE OXYGEN OR CPR IF
NECESSARY. EYES: FLUSH IMMEDIATELY W/LARGE AMOUNTS OF WATER FOR 15
MINS. SKIN: WASH AFFECTED AREAS W/SOAP & WATER. REMOVE CONTAMINATED
CLOTHING. INGESTION: DON'T INDUCE VOMITING. OBTAIN MEDICAL
ATTENTION IN ALL CASES.

Fire Fighting

Flash Point Method:TOC
Flash Point:<-25F
Lower Limits:0.9%
Upper Limits:12.8%
Extinguishing Media:CO2, DRY CHEMICAL, FOAM
Fire Fighting Procedures:FULL PROTECTIVE EQUIPMENT INCLUDING SCBA.
WATER SPRAY INEFFECTIVE, BUT MAY BE USED TO KEEP DOWN VAPORS/COOL
CONTAINERS. FOG NOZZLES ARE PREFERRED.
Unusual Fire/Explosion Hazard:CONTAINER MAY BUILD-UP PRESSURE, EXPLODE,
OR AUTOIGNITE. EXTREMELY FLAMMABLE.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. VENTILATE AREA
& ADJACENT LOW LYING AREAS. REMOVE W/INERT ABSORBENT & NON SPARKING
TOOLS.

Handling

Handling and Storage Precautions:DON'T STORE >120F. KEEP OUT OF REACH
OF CHILDREN. DON'T PUNCTURE OR INCINERATE. DON'T SMOKE. AVOID
CONTACT W/SKIN. DON'T TAKE INTERNALLY.
Other Precautions:DON'T CRUSH (DON'T PLACE IN GARBAGE COMPACTOR).
INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING & INHALING THE
CONTENTS OF THE AEROSOL CAN BE HARMFUL OR FATAL. USE ONLY AROUND
EXPLOSION-PROOF EQUIPME NT.

Exposure Controls

Respiratory Protection:USE BUREAU OF MINES APPROVED MECHANICAL FILTER
RESPIRATOR TO REMOVE SOLID AIRBORNE PARTICLES. CONFINED AREAS:
BUREAU OF MINES APPROVED AIRLINE TYPE RESPIRATORS OR HOODS.
Ventilation:GENERAL DILUTION OR LOCAL EXHAUST IN VOLUME & PATTERN TO
KEEP BELOW LIMITS.
Protective Gloves:REQUIRED
Eye Protection:CHEMICAL SAFETY GOGGLES (SPLASHPROOF)
Supplemental Safety and Health
THIS PRODUCT CONTAINS PIGMENTS WHICH MAY BECOME A DUST NUISANCE WHEN
REMOVED BY ABRASIVE BLASTING, SANDING, OR GRINDING.

Chemical Properties

Boiling Pt:B.P. Text:<0F
Vapor Density:>1
Evaporation Rate & Reference:SLOWER THAN N-BU AC
Solubility in Water:NEGLIGIBLE
Appearance and Odor:USUALLY HAS COLOR, SOLVENT ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:TEMPS >120F & OTHER SOURCES OF IGNITION
Hazardous Decomposition Products:CO, CO2

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS. EXTREMELY FLAMMABLE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.